Product Information
The RetroArcade.us Trackball with translucent white ball is an Arcade Quality trackball and will work with your Jamma board. The device will be automatically configured as soon as it is physically plugged into the Jamma board port.
This
is an excellent trackball for use with the 60-in-1 multigame units
or 138/276-in-1 multigame units.*
*Interface harness
is needed.
Works with all Jamma Board Technology based boards.
Technical Size:
Width: 5.25 Inches
Length: 5.5 Inches
Thickness: 2.5 Inches
Track Ball Hole Size:
3 Inches
*No harness is included - this is the trackball
only
Click
Here to view dimensions and mounting size!
UPC: 738435103422
- Arcade Game Track Ball
Click
Here for wiring diagrams and manuals!
Trackball
Installation Instructions:
The
Trackball must be mounted with label <- Monitor pointing to the
left, as the user sees it.
Jamma
60-IN-1 board settings: specifically the System Settings, which are
entered by powering on the board with the test switch on, need to
be changed so that the Trackball Signal is corrected. To do
this, you need to change Row 2 Switch 7 to ON. This will configure
the Trackball Signal to Exchange DIR/CLK.
Jamma 60-in-1 PCB, iCade,
Arcade Multigame, Multicade board, JAMMA, Jamma PCB, Jamma 60-in-1,
60 in 1, Jamma Boards, 60 in 1 Arcade, 60 in 1 Jamma, Jamma Arcade,
iCade 60 in 1, iCade 60-in-1, Jamma Board
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP), which is know to the State of California to cause cancer. For more information go to P65Warnings.ca.gov
