Crane Machine Claw Coil for 24V to 48V (24ohm) Claws
Specifications:
Windings: 2200
Operating Current: 1.5A
Diameter: 32.51mm (1.28in)
Height: 57.91mm (2.28in)
Wiring Notes:
This claw coil comes in two varieties and gets wired as follows:
If you have wires: Red, White, Blue, Yellow
The Red and White get wired together.
The Yellow and Blue get wired together.
This makes the two gantry wire connections needed for both 24V and 48V DC crane units.
If you have wires: Red, Black, Green, White
The Red and Black get wired together.
The Green and White get wired together.
This makes the two gantry wire connections needed for both 24V and 48V DC crane units.
The strength of the claw is normally adjustable by the voltage from the crane machine PCB board.
UPC Code: 670541219096
Jamma 60-in-1 PCB, iCade, Arcade Multigame, Multicade board, JAMMA, Jamma PCB, Jamma 60-in-1, 60 in 1, Jamma Boards, 60 in 1 Arcade, 60 in 1 Jamma, Jamma Arcade, iCade 60 in 1, iCade 60-in-1, Jamma Board, Classic Arcade Joystick, Classic Red Ball Design, Jamma 60-in-1 PCB, Jamma 60-in-1, MAME Joystick, Arcade Joystick
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP), which is know to the State of California to cause cancer. For more information go to P65Warnings.ca.gov
