Product Information
The RetroArcade.us Trackball with
illuminated translucent white ball is an "Arcade Quality" trackball
and will work with your Jamma board. The device will be automatically
configured as soon as it is physically plugged into the Jamma board
port.
This is an excellent trackball for use with the
60-in-1 multigame units or 138/412-in-1 and other multigame units.*
*Interface
harness is needed, Works with all Jamma Board Technology based
boards.
Technical Size:
Width: 5-1/4 Inches
Length:
5-1/2 Inches
Thickness: 2.5 Inches
Track Ball Hole Size:
3 Inches
UPC: 665570203864
*No harness is included - this is the trackball
only
Click
Here to view dimensions and mounting size!
UPC: -
Arcade Game Track Ball
Click
Here for wiring diagrams and manuals!
Trackball
Installation Instructions:
The
Trackball must be mounted with label <- Monitor pointing to the
left, as the user sees it.
Jamma
60-IN-1 board settings: specifically the System Settings, which are
entered by powering on the board with the test switch on, need to
be changed so that the Trackball Signal is corrected. To do
this, you need to change Row 2 Switch 7 to ON. This will configure
the Trackball Signal to Exchange DIR/CLK.
Jamma 60-in-1 PCB, iCade,
Arcade Multigame, Multicade board, JAMMA, Jamma PCB, Jamma 60-in-1,
60 in 1, Jamma Boards, 60 in 1 Arcade, 60 in 1 Jamma, Jamma Arcade,
iCade 60 in 1, iCade 60-in-1, Jamma Board
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP),which is known to the State of California to cause cancer. for more information go to www.P65Warnings.ca.gov