Product Information: Smaller Design for cocktail and upright arcade systems.
The RetroArcade.us Trackball with
translucent white ball is an "Arcade Quality" trackball and will
work with your Jamma board. The device will be automatically configured
as soon as it is physically plugged into the Jamma board port.
This
is an excellent trackball for use with the 60-in-1 multigame units
or 138/276-in-1 multigame units.*
*Interface harness
is needed.
Works with all Jamma Board Technology based boards.
Technical Size:
Width: 4-1/2 Inches
Length:
4-1/2 Inches
Thickness: 2.5 Inches
Track Ball Hole Size:
2 Inches
*No harness is included - this is the trackball
only
Click
Here to view dimensions and mounting size!
Click
Here for wiring diagrams and manuals!
Trackball
Installation Instructions:
The
Trackball must be mounted with label <- Monitor pointing to the
left, as the user sees it.
UPC:
018227479561 - Arcade Game Track Ball
Jamma 60-IN-1 board
settings: specifically the System Settings, which are entered by
powering on the board with the test switch on, need to be changed
so that the Trackball Signal is corrected. To do this, you
need to change Row 2 Switch 7 to ON. This will configure the
Trackball Signal to Exchange DIR/CLK.
Jamma 60-in-1 PCB, iCade,
Arcade Multigame, Multicade board, JAMMA, Jamma PCB, Jamma 60-in-1,
60 in 1, Jamma Boards, 60 in 1 Arcade, 60 in 1 Jamma, Jamma Arcade,
iCade 60 in 1, iCade 60-in-1, Jamma Board
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP),which is known to the State of California to cause cancer. for more information go to www.P65Warnings.ca.gov