Build Your Own Arcade Crane Machine
Kit Includes:
1.
Crane Gantry (with Pre-wired connector and stop switches) Gantry carnage length: 28 inches
2.
Power supply
3. Speaker
4. Medium size claw
5.
Controller PCB board
6. Coin Meter
7. Count down display
8. Complete wiring harness
9. Power supply
10. Joystick
11. Drop button
12. Claw strength meter for adjustment
13. Includes replacement drop gear and line
14. Power switch
15. Programming and wiring manual included.
Notes:
A 28 Inch gantry is 28 inches from center to center on
the rails that rides on.
To determine if this kit will fit
your machine measure your span on your rails,
must be 28 Inches
from center to center. Some crane machines the rails can
be
adjusted and others cannot.
Click
here to see our Crane Kit in Action.. (Video takes a few minutes
to load)
Click
Here to download the manual...
Warranty: 90 Day DOA exchange warranty only
Installation
of this product requires professional electronic experience, use
at your own risk.
UPC: 670541220382
Jamma 60-in-1 PCB, iCade, Arcade Multigame,
Multicade board, JAMMA, Jamma PCB, Jamma 60-in-1, 60 in 1, Jamma
Boards, 60 in 1 Arcade, 60 in 1 Jamma, 19 in 1 jamma, Jamma Arcade,
iCade 60 in 1, iCade 60-in-1, Jamma 302-in-1, Jamma 302 in 1, Jamma
19-in1, Jamma 19 in 1, Jamma Board, Jamma Boards, Cocktail Arcade,
Jamma Button, Crane Machine Kit, Crane Machine, arcade crane,
crane gantry, claw machine, claw game, the claw machine, arcade machine
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP), which is know to the State of California to cause cancer. For more information go to P65Warnings.ca.gov
